Installation Instructions for Sigma Products Diaper Sprayer/ Bidet

Parts Included	Parts Required
Pre-assembled Bidet Kit	Adjustable Wrench
Mounting bracket
Screw anchors
Double sided tape

Step 1: Turn off the water supply by turning the shut-off valve counter-clockwise.

Step 2: Flush to ensure that flush tank is empty.

Step 3: Remove pipe connecting the shut-off valve to the tank.

Step 4: Screw the large (1”) tank nut to the underside of the flush tank.

Step 5: Screw the small (9/16”) nut to the shut-off valve.

Step 6: Attach the wall bracket with either the double sided tape or anchor screws provided.

Step 7: Switch on the shut-off valve.  Ensure there are no leaks.*

*If any leaks do occur, use an adjustable wrench to softly tighten nuts until leak stops